Caterpillar 3695-2 — Fault Code Guide
Official Description: Particulate Trap Regeneration Inhibit Switch : Erratic, Intermittent, or Incorrect 3184-2 DPF Regeneration Inhibit Switch : Erratic, Intermittent, or Incorrect
Recommended Replacement Part: Dpf Differential Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Caterpillar Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Caterpillar Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the DPF differential pressure sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code 3695-2 remains active, replace the DPF differential pressure sensor and clear logged codes.
Source reference: 80-1275.pdf (Page 10)