HeavyMachineryCodes.com
Caterpillar CAT_HYPHEN

Caterpillar 626-5 — Fault Code Guide

Official Description: Engine Start Enable Device 1 : Current Below Normal 2417-5 Ether Injection Control Solenoid : Current Below Normal

Recommended Replacement Part: Hydraulic Solenoid Valve
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Caterpillar Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the hydraulic solenoid valve.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code 626-5 remains active, replace the hydraulic solenoid valve and clear logged codes.

Source reference: 80-1275.pdf (Page 3)

Related Caterpillar Fault Codes