Generic 91408-3 — Fault Code Guide
Official Description: Angle sensor values, lift and tilt function check The purpose of this test is to see the dependence between lift and tilt function and to check that the angle sensor registers the angle change when the function changes position
Recommended Replacement Part: Replacement Sensor Or Valve
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Generic Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Generic Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the replacement sensor or valve.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code 91408-3 remains active, replace the replacement sensor or valve and clear logged codes.
Source reference: VOLVO-L180G-WHEEL-LOADER-Service-Repair-Manual.pdf (Page 1)