HeavyMachineryCodes.com
Kubota DTC

Kubota P0087 — Fault Code Guide

Official Description: 633 7 Engine Fuel Actuator 1 Control Command Pressure limiter emergency open - Rail pressure sensor is normal - Sensor supply voltage VCC# is normal Combination of below A and B A: Fuel leak (P0093) is detected B: Condition (1) or (2) is fulfilled; (1) Rail pressure exceeds 191 MPa (1950 kgf/cm2, 27700 psi) (2) Within 1 sec, after the rail pressure goes 191 MPa (1950 kgf/cm2, 27700 psi) or less [Before the pressure decrease, the rail pressure is 191 MPa (1950 kgf/cm2, 27700 psi) or more] one tim

Recommended Replacement Part: Fuel Rail Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the fuel rail pressure sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0087 remains active, replace the fuel rail pressure sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 1)

Related Kubota Fault Codes