HeavyMachineryCodes.com
Kubota DTC

Kubota P0093 — Fault Code Guide

Official Description: 1239 1 Engine Fuel Leakage 1 Fuel leak from high pressured fuel system (Fuel consumption is calculated from the difference of fuel pressure of before and after the injection, and the error will be detected when excess fuel consumption is found) - Battery voltage is normal - Sensor supply voltage VCC# is normal - Rail pressure sensor is normal - Supply pump (SCV) is normal - Injector and injector drive circuit are normal - NE signal is active [Engine is operating (700 rpm or more)] - No DTC of P0

Recommended Replacement Part: Fuel Rail Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the fuel rail pressure sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0093 remains active, replace the fuel rail pressure sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 1)

Related Kubota Fault Codes