HeavyMachineryCodes.com
Kubota DTC

Kubota P0112 — Fault Code Guide

Official Description: 172 4 Engine Air Inlet Temperature Ground short circuit of sensor or harness - Battery voltage is normal Voltage of intake air temperature sensor is 0.05 V or less 2.8 sec or more During start-up = -20 degC (- 4 degF) [default value] Under other conditions = 40 degC (104 degF) [default value] ON - White smoke increases at low temperature Diagnostic counter = zero 30 sec

Recommended Replacement Part: Wiring Harness
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the wiring harness.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0112 remains active, replace the wiring harness and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 1)

Related Kubota Fault Codes