Kubota P0101 — Fault Code Guide
Official Description: 132 1 Engine Inlet Air Mass Flow Rate Engine inlet air mass flow rate lacking (Disconnect turbo blower intake hose) - Engine is operating 1000 rpm or more - Coolant temp. is 15 degC (59 degF) or more (Coolant temp. sensor is normal) - MAF sensor is normal - EGR valve is normal - Intake throttle valve is normal - Battery voltage is normal Engine Inlet Air Mass Flow Rate: less than half of target value 10.0 sec or more Output limitation: Approximately 75% of normal condition EGR stop Intake thrott
Recommended Replacement Part: Throttle Position Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the throttle position sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code P0101 remains active, replace the throttle position sensor and clear logged codes.
Source reference: Codes Défaut KUBOTA.pdf (Page 7)