HeavyMachineryCodes.com
Kubota DTC

Kubota P0103 — Fault Code Guide

Official Description: 132 3 Engine Inlet Air Mass Flow Rate +B short circuit of sensor or harness - Battery voltage is normal - Engine speed is between 700 rpm and 2800 rpm - Target intake mass air flow is 460 or less and it continues for 3 sec - Sensor supply voltage is normal Mass air flow sensor voltage: 4.9 V or more at normal operation condition 2.8 sec or more Sensor output: 0.7 times of target value at normal condition [default value] Output limitation: Approximately 75% of normal condition EGR stop Intake thr

Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0103 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 7)

Related Kubota Fault Codes