HeavyMachineryCodes.com
Kubota DTC

Kubota P0118 — Fault Code Guide

Official Description: 110 3 Engine Coolant Temperature Open circuit or +B short circuit of sensor or harness - Battery voltage is normal Voltage of coolant temperature sensor is 4.9 V or more 2.8 sec or more During start-up = -25 degC (- 13 degF) [default value] Under other conditions = 80 degC (176 degF) [default value] Output limitation: Approximately 75% of normal condition EGR stop Intake throttle 100% open ON - White smoke increases at low temperature - Insufficient output - Worsening exhaust gas emissions Key s

Recommended Replacement Part: Coolant Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the coolant temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0118 remains active, replace the coolant temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 2)

Related Kubota Fault Codes