HeavyMachineryCodes.com
Kubota DTC

Kubota P0183 — Fault Code Guide

Official Description: 174 3 Engine Fuel Temperature 1 Open circuit or +B short circuit of sensor or harness - Battery voltage is normal Voltage of temperature sensor in supply pump is 4.9 V or more 2.8 sec or more During start-up = -20 degC (- 4 degF) [default value] Under other conditions = 45 degC (113 degF) [default value] Output limitation: Approximately 75% of normal condition ON - Diagnostic counter = zero 30 sec

Recommended Replacement Part: Fuel Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the fuel temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0183 remains active, replace the fuel temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 2)

Related Kubota Fault Codes