HeavyMachineryCodes.com
Kubota DTC

Kubota P0217 — Fault Code Guide

Official Description: 110 0 Engine Coolant Temperature Overheat of engine coolant temperature - Coolant temperature sensor is normal Engine coolant temperature is 120 degC (248 degF) or more 5 sec or more Output limitation: Approximately 75% of normal condition EGR stop Intake throttle 100% open ON - Insufficient output - Overheat Diagnostic counter = zero 30 sec

Recommended Replacement Part: Coolant Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the coolant temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0217 remains active, replace the coolant temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 3)

Related Kubota Fault Codes