HeavyMachineryCodes.com
Kubota DTC

Kubota P0219 — Fault Code Guide

Official Description: 190 0 Engine Speed Engine speed exceeds threshold speed - Key switch is ON Engine speed is 3500 rpm or more 3 revolutions or more Stop injection (Q = 0 mm3/st) ON - Overrun Diagnostic counter = zero Immediately

Recommended Replacement Part: Pressure Switch
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the pressure switch.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0219 remains active, replace the pressure switch and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 3)

Related Kubota Fault Codes