HeavyMachineryCodes.com
Kubota DTC

Kubota P0237 — Fault Code Guide

Official Description: 102 4 Engine Intake Manifold #1 Pressure Ground short circuit of sensor or harness Failure of sensor - Battery voltage is normal - Sensor supply voltage VCC# is normal Voltage of boost pressure sensor is 0.2 V or less 2.8 sec or more 65 kPa (0.663 kgf/cm2, 9.43 psi) [default value] Default value is set in consideration with high altitude usage ON - Insufficient output Key switch turn OFF ―

Recommended Replacement Part: Map Boost Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the MAP boost pressure sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0237 remains active, replace the MAP boost pressure sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 3)

Related Kubota Fault Codes