HeavyMachineryCodes.com
Kubota DTC

Kubota P0404 — Fault Code Guide

Official Description: 523574 4 proprietary EGR actuator coil short - Battery voltage is normal - NO DTC of U0077 "CAN1 Bus off" - EGR control line is normal EGR actuator coil short error signal received via CAN 2.8 sec or more Output limitation: Approximately 75% of normal condition EGR stop ON - Insufficient output - Worsening exhaust gas emissions Key switch turn OFF ―

Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0404 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 8)

Related Kubota Fault Codes