HeavyMachineryCodes.com
Kubota DTC

Kubota P0524 — Fault Code Guide

Official Description: 100 1 Engine Oil Pressure Oil pressure switch - Battery voltage is normal - Key switch turn ON - Starter switch signal (ECU: V12 terminal) is not activated - 10 sec or more after engine start [700 rpm or more] Oil pressure switch ON: continues one sec or more transient None ON - Engine stops Key switch turn OFF ―

Recommended Replacement Part: Engine Oil Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the engine oil pressure sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P0524 remains active, replace the engine oil pressure sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 4)

Related Kubota Fault Codes