Kubota P0611 — Fault Code Guide
Official Description: 523525 1 proprietary Injector charge voltage: Low Failure of charge circuit of ECU - Battery voltage is normal - CPU is normal Injector charge voltage: Low Failure of charge circuit of ECU transient Output limitation: Approximately 75% of normal condition EGR stop Intake throttle 100% open To minimize PM emission to DPF ON - Insufficient output - Worsening exhaust gas emissions - Engine stops in some cases Key switch turn OFF ―
Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code P0611 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.
Source reference: Codes Défaut KUBOTA.pdf (Page 4)