HeavyMachineryCodes.com
Kubota DTC

Kubota P1274 — Fault Code Guide

Official Description: 523539 2 proprietary High pressure 1 error - Sensor supply voltage VCC# is normal - Rail pressure sensor is normal (Approximate parameter) Rail pressure of 230 MPa (2350 kgf/cm2, 33400 psi) or more continues 1 sec under the condition of 800 rpm or more Rail pressure of 220 MPa (2250 kgf/cm2, 31900 psi) or more continues 1 sec under the condition of less than 800 rpm [Threshold changes depending on the engine speed. 700 rpm should be used as a reference] one time or more Output limitation: Approx

Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P1274 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 5)

Related Kubota Fault Codes