Kubota P1275 — Fault Code Guide
Official Description: 523540 2 proprietary High pressure 2 error - Sensor supply voltage VCC# is normal - Rail pressure sensor is normal (Approximate parameter) Rail pressure of more than 197 MPa (2010 kgf/cm2, 28600 psi), and less than 230 MPa (2350 kgf/cm2, 33400 psi) continues total time for 35 seconds under condition of 800 rpm or more [Threshold changes depending on the engine speed. 2000 rpm should be used as a reference] Or, rail pressure of more than 220 MPa (2250 kgf/cm2, 31900 psi) continues total time for
Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code P1275 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.
Source reference: Codes Défaut KUBOTA.pdf (Page 6)