HeavyMachineryCodes.com
Kubota DTC

Kubota P2108 — Fault Code Guide

Official Description: 523580 2 proprietary Intake throttle feedback error - Battery voltage is normal (Approximate parameter) Deviation of throttle position is not corrected in 20 times of duty error recovery action 5 sec or more Output limitation: Approximately 75% of normal condition Intake throttle 100% open ON - Key switch turn OFF ―

Recommended Replacement Part: Throttle Position Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the throttle position sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P2108 remains active, replace the throttle position sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 8)

Related Kubota Fault Codes