HeavyMachineryCodes.com
Kubota DTC

Kubota P2151 — Fault Code Guide

Official Description: 523524 3 proprietary Wiring harness short to +B - Engine is operating - Battery voltage is normal Wiring harness short to +B 8 times or more Injectors which have error stop injection Output limitation: Approximately 75% of normal condition EGR stop Intake throttle 100% open To minimize PM emission to DPF Injectors which have no error are operated ON - Insufficient output - Engine vibration increases - Worsening exhaust gas emissions - Engine stops in some cases Key switch turn OFF ―

Recommended Replacement Part: Egt Exhaust Gas Temperature Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the EGT exhaust gas temperature sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P2151 remains active, replace the EGT exhaust gas temperature sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 7)

Related Kubota Fault Codes