Kubota P2621 — Fault Code Guide
Official Description: 523582 4 proprietary Intake throttle lift sensor: Low - Battery voltage is normal - Sensor supply voltage VCC# is normal Intake throttle lift sensor voltage: 0.1 V or less 2.8 sec or more Output limitation: Approximately 75% of normal condition Intake throttle 100% open ON - Key switch turn OFF ―
Recommended Replacement Part: Throttle Position Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the throttle position sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code P2621 remains active, replace the throttle position sensor and clear logged codes.
Source reference: Codes Défaut KUBOTA.pdf (Page 9)