HeavyMachineryCodes.com
Kubota DTC

Kubota P2622 — Fault Code Guide

Official Description: 523582 3 proprietary Intake throttle lift sensor: High - Battery voltage is normal - Sensor supply voltage VCC# is normal Intake throttle lift sensor voltage: 4.89 V or more 2.8 sec or more Output limitation: Approximately 75% of normal condition Intake throttle 100% open ON - Key switch turn OFF ―

Recommended Replacement Part: Throttle Position Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the throttle position sensor.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P2622 remains active, replace the throttle position sensor and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 9)

Related Kubota Fault Codes