HeavyMachineryCodes.com
Kubota DTC

Kubota P3006 — Fault Code Guide

Official Description: 3701 15 Diesel Particulate Filter Status PM accumulation level 3 - Battery voltage is normal PM accumulation more than trigger level Regeneration level = 3 transient Output limitation: Approximately 50% of normal condition To minimize PM emission ON - Insufficient output Diagnostic counter = zero Immediately

Recommended Replacement Part: Replacement Sensor Or Valve
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the replacement sensor or valve.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P3006 remains active, replace the replacement sensor or valve and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 10)

Related Kubota Fault Codes