Kubota P3011 — Fault Code Guide
Official Description: 132 15 Engine Inlet Air Mass Flow Rate Disconnect the hose between the turbo blower out and intake flange - Other than during regeneration mode - Engine speed is 1600 rpm or more - Target intake air flow value is 950 mg/cyl or more - MAF sensor is normal - EGR valve is normal - Intake throttle valve is normal - Boost pressure sensor is normal - Barometric pressure sensor is normal - Coolant temp. sensor is normal Boost pressure sensor output is less than target level in high air flow operating c
Recommended Replacement Part: Dpf Differential Pressure Sensor
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →
Quick Diagnostic Checklist
- Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the DPF differential pressure sensor.
- Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
- Test or Replace Component: If wiring tests good and code P3011 remains active, replace the DPF differential pressure sensor and clear logged codes.
Source reference: Codes Défaut KUBOTA.pdf (Page 10)