HeavyMachineryCodes.com
Kubota DTC

Kubota P3012 — Fault Code Guide

Official Description: 523589 17 proprietary During regeneration mode, Engine warm-up condition is not satisfied (coolant temp. is low) - During parked active regeneration mode Engine coolant temp. stays less than 65 degC (149 degF) for 1500 seconds or more under parked regeneration process transient None ON - Diagnostic counter = zero (Leaving from Parked active regeneration status) Immediately

Recommended Replacement Part: Replacement Sensor Or Valve
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the replacement sensor or valve.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code P3012 remains active, replace the replacement sensor or valve and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 10)

Related Kubota Fault Codes