HeavyMachineryCodes.com
Kubota DTC

Kubota U0081 — Fault Code Guide

Official Description: 523548 2 proprietary CAN-KBT original frame open circuit error - Battery voltage is normal - Key switch turn OFF to ON - Starter switch signal (ECU: V12 terminal) is not activated - NO error of "CAN2 Bus off" CAN2 KBT Frame open circuit error transient Forced Idle (Accelerator = 0%) ON - Insufficient output Key switch turn OFF ―

Recommended Replacement Part: Pressure Switch
Need to get your machine back on the job fast? Check OEM-quality aftermarket stock and pricing:
Shop Kubota Replacement Parts on FridayParts →

Quick Diagnostic Checklist

  1. Inspect Harness & Connectors: Check for loose pins, corrosion, oil contamination, or chafed wires near the pressure switch.
  2. Verify Supply Voltage & Ground: Test reference voltage (typically 5V or 12V/24V depending on circuit) with a multimeter.
  3. Test or Replace Component: If wiring tests good and code U0081 remains active, replace the pressure switch and clear logged codes.

Source reference: Codes Défaut KUBOTA.pdf (Page 7)

Related Kubota Fault Codes